built-in wired Ethernet LAN + built-in Wi-Fi on CHU/CHE variants + supported Wi-Fi or cellular adapter through HOST USB
The documented network paths available to the camera or its required transmitter.
● Manufacturer-documented path
The GY-HC900 family can send completed clips automatically or manually to FTP, SFTP, implicit FTPS, or explicit FTPES destinations. Wired Ethernet is built in; CHU/CHE variants also provide internal Wi-Fi, while supported HOST USB adapters can add other paths. HD+Web proxy recording can be split and uploaded in chunks during recording.
Direct camera client
The documented network paths available to the camera or its required transmitter.
File behavior is quoted conservatively until a Camera to Anywhere fixture reproduces it.
Transfer can begin from the documented camera-side behavior shown here.
Automatic chunked upload is format-dependent. Use current firmware and the current supported-adapter list; FTP resume is unavailable with SFTP. Physical Camera to Anywhere interoperability is not yet lab-verified.
Menu labels, behaviors, and warnings on this page are paraphrased from official manufacturer material.
Inspect every citation ↓Gather these items first, then enter the Camera to Anywhere job credential exactly as issued. The camera sends to the public ingest edge; your private destinations stay downstream.
Current GY-HC900-family firmware.
Built-in Ethernet, built-in Wi-Fi on the applicable CHU/CHE variant, or a supported HOST USB adapter.
A short recorded test clip and, for chunk testing, media configured for the documented HD+Web proxy workflow.
Camera to Anywhere host, protocol, port, credentials, and destination directory.
Expected server fingerprint for SFTP/FTPS/FTPES.
Displayed in manual and auto server selection.
Must match the destination listener.
Identifies the receiver.
Connects to the active ingress service.
Routes clips to the correct workflow.
Authenticates and identifies the source.
Completes authentication.
Uses passive FTP data connections.
Determines which completed clips are watched and where they are sent.
Controls how frequently a growing proxy recording is split and uploaded.
Run this checklist on the exact body, firmware, network, and media format you will use on assignment.
Set Upload to Auto, leave High-Speed recording mode, choose Slot and Server, then turn Auto Upload On.
Do not record to the slot currently selected for auto FTP, or schedule transfer for the other slot.
Confirm System is HD+Web, proxy recording is on Slot B, Division is not Off, and Auto Upload is On.
Verify network path, Server, Port, Protocol, Username, Password, and Dir. Path.
Use a resume-capable non-SFTP endpoint without HTTP proxy and a smaller partial file from the same clip.
The local archive is retained for research continuity if an official link changes. It is not redistributed through this site.
Printed pp. 153-154, Upload Settings/Clip Server; pp. 200-204, Auto FTP, chunked upload, Manual FTP, and Resume
Open manufacturer source ↗This guide compiles all discovered FTP-related setup evidence for this model, but it is not a promise that every firmware version and venue network will behave identically. Verification records the exact body, firmware, access point, protocol, payload, and result.
Join the founding beta and help turn the documented route into a tested setup guide with original menu photography.
Test this path ↗