wired Ethernet + Wi-Fi via optional module + 4G/LTE USB modem
The documented network paths available to the camera or its required transmitter.
● Manufacturer-documented path
AJ-PX5000G can initiate FTP transfer of P2 main-material clips, proxy clips over wired Ethernet; Wi-Fi via optional module; 4G/LTE USB modem. The documented route accepts a user-configured server; it is suitable for a destination-neutral ingest gateway after protocol, firmware, and payload testing.
Accessory-assisted camera client
The documented network paths available to the camera or its required transmitter.
File behavior is quoted conservatively until a Camera to Anywhere fixture reproduces it.
Transfer can begin from the documented camera-side behavior shown here.
Adapter compatibility depends on firmware/manual revision; the cited brochure establishes FTP but is not used to infer SFTP Physical Camera to Anywhere interoperability is not yet lab-verified.
Menu labels, behaviors, and warnings on this page are paraphrased from official manufacturer material.
Inspect every citation ↓Gather these items first, then enter the Camera to Anywhere job credential exactly as issued. The camera sends to the public ingest edge; your private destinations stay downstream.
Establish a supported route: wired Ethernet; Wi-Fi via optional module; 4G/LTE USB modem.
Have the required hardware or provisioning ready: AJ-WM30/AJ-WM50 wireless module for Wi-Fi; supported 4G/LTE modem for mobile broadband.
Prepare a reachable FTP server, login, writable directory, and enough server capacity for P2 main-material clips, proxy clips.
Firmware qualification: Adapter compatibility depends on firmware/manual revision; the cited brochure establishes FTP but is not used to infer SFTP.
Defines both the destination host and, where supported, its login-relative folder.
Authenticates the FTP client.
Completes server authentication.
Switches supported P2 models from plain FTP transport to their documented SSH-secured behavior.
Must match the server whenever SSH is enabled.
Controls what is queued after recording.
Run this checklist on the exact body, firmware, network, and media format you will use on assignment.
Verify firmware, network device selection, adapter recognition, recording/playback state, and any profile or license prerequisite.
Confirm DHCP/static address, gateway, DNS, server URL, port, route, and venue firewall/NAT behavior.
Check destination syntax, write permission, free space, card state, file-size limits, and whether the format is eligible.
Check upload enablement, profile state, recording format, card access load, shot-mark/proxy filters, and incompatible streaming/NDI modes.
The local archive is retained for research continuity if an official link changes. It is not redistributed through this site.
Network Functions: FTP client; auto transfer of proxy/full files
Open manufacturer source ↗This guide compiles all discovered FTP-related setup evidence for this model, but it is not a promise that every firmware version and venue network will behave identically. Verification records the exact body, firmware, access point, protocol, payload, and result.
Join the founding beta and help turn the documented route into a tested setup guide with original menu photography.
Test this path ↗